Temp Humidity Sensor - HENGKO Hand-Held HT-608 d Digital Humidity and Temperature Meter, Data Logger for Spot-checking & Quick Inspections – HENGKO
Temp Humidity Sensor - HENGKO Hand-Held HT-608 d Digital Humidity and Temperature Meter, Data Logger for Spot-checking & Quick Inspections – HENGKO Detail:
The robust sintered metal housing of the non-sensitive HENGKO HT608 d handheld dew point meter data logger protects it against mechanical impacts. It can therefore measure temperature and humidity even in harsh environmental conditions.
✔ Measures air temperature and humidity quickly and reliably
✔ Probe with an exceptionally small diameter of 8 mm
✔ Measuring range: humidity 0 to 100% relative humidity; temperature -30 to +80°C
✔ Thin humidity/temperature probe with cable
✔ On-board CR2450 wide warm button battery, external power still ensures the normal operation of the module, no data loss
✔ Integrated large-capacity flash chip, allowing storage of up to 65,000 records, meeting long-term recording needs.
✔ Output temperature and humidity, dew point temperature, wet bulb temperature.
✔ Ultra-low power consumption design, when powered by the onboard button battery, the average power consumption is only tens of microamperes.
✔ Robust metal housing and protection against dust and water jets in compliance with protection class IP 65
✔ Two software versions are available for measurement data analysis on the PC, basic software can be downloaded free of charge
Do your short-term measurements reveal no irregularities? Yet the ambient building or storage conditions still do not meet the designated requirements? The HENGKO HT608 d is the perfect humidity meter & data logger for analyzing precise industrial development using long-term measurements.
With its large measurement data memory (up to 65000 readings can be recorded) and its on-board CR2450 wide warm button battery, external power still ensure the normal operation of the module, no data loss, the HENGKO HT608 d is the ideal instrument for the long-term recording of climate data.
Safety and convenience at all levels
Thanks to its robust metal housing, the humidity meter & data logger is protected against hard impacts and will maintain its durability even in harsh environmental conditions. Moreover, it conforms to protection class IP 65 and can therefore be exposed to water jets and dust. This is particularly handy if cleaning is undertaken at the measuring location, because this means that the HENGKO HT608 d does not need to be removed. The HENGKO HT608 d will not sustain any damage even in dusty or dirty conditions.
This HENGKO HT608 d makes the security of your measurement data top priority. As soon as you start a measurement program and values for temperature and humidity are stored in the HENGKO HT608 d, these will never be lost again. Even in the face of emergency power, the instrument can still work normally, to ensure that the data is not lost.
Wide warm button battery (CR2450) are provided for the HENGKO HT608 d power supply. If a battery is spent, you can change this yourself.
| General technical data | |
| Length probe shaft tip | 250 mm (300 600 can be choose) |
| Diameter probe shaft tip | 8 mm |
Technical data humidity sensor
We adpots high precision RHT-H series capacitive digital sensor as the temperature and humidity measurement component. Please select the suitable model for your probe.
| Model | Humidity Accuracy(%RH) |
Temperature (℃) | Voltage Supply(V) |
Interface | Relative Humidity Range(RH) |
| RHT-20 | ±3.0 @ 20-80% RH |
±0.5 @ 5-60 ℃ |
2.1 to 3.6 | I2C | -40 to 125 ℃ |
| RHT-21 | ±2.0 @ 20-80% RH |
±0.3 @ 5-60 ℃ |
2.1 to 3.6 | I2C | -40 to 125 ℃ |
| RHT-25 | ±1.8 @ 10-90% RH |
±0.2 @ 5-60 ℃ |
2.1 to 3.6 | I2C | -40 to 125 ℃ |
| RHT-30 | ±2.0 @ 10-90% RH |
±0.2 @ 0-65 ℃ |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
| RHT-31 | ±2.0 @ 0-100% RH |
±0.2 @ 0-90 ℃ |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
| RHT-35 | ±1.5 @ 0-80% RH |
±0.1 @ 20-60 ℃ |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
| RHT-40 | ±1.8 @ 0-100% RH |
±0.2 @ 0-65 ℃ |
1.08 to 3.6 | I2C | -40 to 125 ℃ |
| RHT-85 | ±1.5 @ 0-100% RH |
±0.1 @20 to 50 °C |
2.15 to 5.5 | I2C | -40 to 125 ℃ |
HENGKO Provides RHT-H serious chips to help you choose our temperature transmitter / control / sensor / probe humidity and other products that to meet your measurement in different enviroment.
|
Type |
Technical Specifications |
|
|
Current |
DC 4.5V~12V |
|
|
Power |
<0.1W |
|
|
Measurement range |
-30~80°C，0~100%RH |
|
|
Accuracy
|
Temperature |
±0.1℃(20-60℃) |
|
Humidity |
±1.5%RH（0%RH~80%RH,25℃) |
|
|
Long-term stability |
humidity：<1% RH/Y temperature：<0.1℃/Y |
|
|
Dew point range: |
-60℃~60℃（-76 ~ 140°F） |
|
|
Response time |
10S(wind speed 1m/s) |
|
|
Communication interface |
RS485/MODBUS-RTU |
|
|
Records and Software |
65,000 records, with Smart Logger professional data management and analysis software |
|
|
Communication band rate |
1200, 2400, 4800, 9600, 19200, 115200(can be set), 9600pbs default |
|
|
Byte format |
8 data bits, 1 stop bit, no calibration |
|
Areas of application for the HT608 c
✔ Monitoring and documentation of the air conditioning in buildings
✔ Monitoring and documentation of the temperature and humidity in production and in warehouses
✔ Monitoring and documentation of the ideal spot-checking tool for everything from structural moisture measurement
✔ Monitoring and documentation of the humidity measurement in industrial production processes
✔ Monitoring and documentation of the life science applications
Which HT608 humidity sensor is right for you?
Can't find a product that meets your needs? Contact our sales staff for OEM/ODM customization services!
Related Products
Product detail pictures:
Related Product Guide:
With advanced technologies and facilities, strict high quality regulate, reasonable price tag, excellent support and close co-operation with shoppers, we have been devoted to furnishing the best benefit for our buyers for Temp Humidity Sensor - HENGKO Hand-Held HT-608 d Digital Humidity and Temperature Meter, Data Logger for Spot-checking & Quick Inspections – HENGKO, The product will supply to all over the world, such as: Italy , Bolivia , UK , We care about every steps of our services, from factory selection, product development & design, price negotiation, inspection, shipping to aftermarket. Now we have implemented a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our solutions have been strictly inspected before shipment. Your Success, Our Glory: Our aim is to help customers realize their goals. We're making great efforts to achieve this win-win situation and sincerely welcome you to join us.
By Mary
from Armenia
- 2015.09.23 18:44
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Carlos
from UK
- 2016.09.26 12:12
