Humidity Sensor - Anti-condensation Industrial Temperature and Relative Humidity Transmitter HT407 for Demanding Applications – HENGKO
Humidity Sensor - Anti-condensation Industrial Temperature and Relative Humidity Transmitter HT407 for Demanding Applications – HENGKO Detail:
✔ industrial sensors for applications up to 200°C
✔ IP 65
✔ for measuring relative humidity and temperature
✔ with humicap humidity sensing element
✔ with current or voltage output
Designed for use in industrial process automation, the sensors of the HT407 relative humidity temperature sensor can be installed in virtually any position. The robust devices are available to be mounted in ducts, on walls, or are available with a stainless steel probe that can be up to 5 m away from the output electronics. Depending on the application, we either recommend using transmitters with exchangeable or permanently assigned probes. The type of filters and filter materials can be adapted to suit the respective protection category required (up to IP65).
All devices work with an internal processor which uses the measured values for relative humidity and temperatures to also calculated absolute humidity, mixture ratio (water/air) or the dew point (can choose). Digitalization of the signal processing allows the measurement accuracy for humidity to reach excellent values of ±2.0% RH, and with the platinum resistance sensor, the accuracy of the temperature measurement reaches tolerances of ±0.3℃. Depending on the individual design, the sensors can be used at temperatures of between 0 °C and +200 °C and at pressures of up to 10 bar in non-corrosive air.
| Humidity range | 0~100%RH |
| Temperature range | 0~200℃ |
| Humidity accuracy | ±2%RH |
| Temperature accuracy | ±0.3℃ |
| Response time | ≤15s |
| Output | 4-20mA current signal /RS485 interface |
| Supply voltage | 24V DC |
Features
√ IP65
316L stainless steel material
Damp proof, condensation, dust, high temperature, rain and snow and other harsh environment, it can also work normally
√ Output signal
4-20mA
RS485
Technical Data
Humidity measuring
HT407
0-100%RH
±2%RH（20% RH…80% RH）
±0.1%RH
<0.5%RH
15s
Temperature measuring
HT407 humidity sensor
Temperature range
Accuracy(temperature)
Repeatability(Temperature)
Long-term steady(Temperature)
Response time-Temperature
（tau 63%）
0℃~200℃
±0.2℃ @25℃
±0.1℃
<0.04℃
30s
Output/Parameter
HT407 humidity sensor
Parameter calculation
Housing material
Displayer working temperature
Install method
T, RH, dew point, mixture ratio & absolute humidity for choose
ABS
-40~70℃
Thread/Flange
Can't find a product that meets your needs? Contact our sales staff for OEM/ODM customization services!
Product detail pictures:
Related Product Guide:
We support our consumers with ideal good quality merchandise and large level provider. Becoming the specialist manufacturer in this sector, we have attained wealthy practical encounter in producing and managing for Humidity Sensor - Anti-condensation Industrial Temperature and Relative Humidity Transmitter HT407 for Demanding Applications – HENGKO, The product will supply to all over the world, such as: Bangladesh , Honduras , Paraguay , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Debby
from South Africa
- 2016.08.28 16:02
The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
By Paula
from Finland
- 2016.02.18 15:54
