High Temperature and Humidity Transmitter up to 200 °C (392 °F) Integrated ±2%RH Humidity and Temperature Sensor for Industrial Process Monitoring and Control HG808-T
The HG808-T relative humidity meter is optimized for the best reliability in industrial applications from -40 °C (-40 °F) up to 200 °C (392 °F).
In addition to highly accurate measurement of the relative humidity (RH) and temperature (T), the device calculates all other humidity-related parameters.
This temperature and humidity transmitter is specialized in strict industrial applications with HENGKO RHT series humidity measuring element.
It has the advantage of accurately measuring, adapts to a wide temperature range, excellent chemical pollution resistance, steady working, and long service time, etc. 2-pin temperature and humidity 4-20mA current signal output.
Here’s a specification details for the HG808-T series Humidity Transmitter :
| Category | Specification |
|---|---|
| Temperature Range | -40 ~ +200°C |
| Humidity Range | 0 ~ 100% RH (Recommend < 95% RH) |
| Temperature Accuracy | ±0.1°C (@ 20°C) |
| Humidity Accuracy | ±2% RH (@ 20°C, 10 ~ 90% RH) |
| Power Supply | DC 10V ~ 28V |
| Power Consumption | < 0.5W |
| Analog Outputs | Humidity + Temperature: 4~20mA / 0-5V / 0-10V (one out of three) |
| RS485 Digital Output | Temperature, humidity, dew point, PPM (read simultaneously) |
| Resolution Ratio | 0.01°C / 0.1°C (optional) 0.01% RH / 0.1% RH (optional) |
| Baud Rate | 1200, 2400, 4800, 9600, 19200, 115200 (default: 9600 bps) |
| Acquisition Frequency | Fastest response: 1 second; other settings per PLC |
| Byte Format | 8 data bits, 1 stop bit, no check |
| Pressurization | 16 bar |
| Working Temperature | -20°C ~ +60°C, 0% RH ~ 95% RH (Non-condensation) |
| Probe Type | Split type: Probe 3 –Split type ：3A# / 3B# Probe 5 – Pipeline ：5A# / 5B# Probe 6 – Split type ：6A# / 6B# |
We offer 6 types of probes for the HG808 Humidity Transmitter,
with each type available in both A and B versions,
providing a total of 12 probes for various application options.
Applications
✔ Industrial process testing and control
✔ Food and Medicine
✔ Industrial dryers and humidifiers
✔ Meteorology and environment box
✔ Clean room
Features
Refine on details
Reflect brand strength
Professional technology team
24/7/365 expert support and solution
√ Cast aluminum shell
Good corrosion resistance
Heat-resistant
IP67 Waterproof
√ Connect method
Split-type design/
Easy to install
①Flange duct
②Threaded pipe
√ Output signal
4-20mA
RS485
√ Stainless steel/
Metal enclouse
Heat-resistant
Waterproof
Resist various environments such as high temperature and humidity, chemical thermoelectric workshop, etc.
Feature
features of the HG808-T series temperature and humidity transmitter:
| Category | Details |
|---|---|
| Model | HG808-T Series |
| Application Areas | - High-temperature process engineering - Industrial drying - Combustion flue gas emissions - Testing chambers - Corrosive gases from petrochemical emissions and refinery processes |
| Temperature Operation Range | Up to 200°C |
| Key Features | - Ultra-high temperature-resistant sensors - Durable cast aluminum housing - Stainless steel components - Long-term stability and corrosion resistance |
| Probe Type | Split/pipeline type probes with anti-pollution and oil resistance capabilities |
| Output Options | - RS485 output - Two analog outputs |
| Analog Output Resolution | 15 high-resolution bits |
| Digital Output Resolution | Optional resolution of 0.1 or 0.01 |
| Sensor Synchronized Function | Anti-condensation function to keep the sensor synchronized in high humidity environments |
| Digital Output Readings | Simultaneously reads dew point, humidity, temperature, and PPM values |
| Communication Protocol | Standard Modbus RTU protocol for easy interconnection with PLC, DCS, and various configuration software |
| Voltage Input | 10V~28V ultra-wide voltage input |
| Protection Features | - Overcurrent protection - Power polarity protection - ESD safety protection - Power supply anti-reverse connection function |
Which HG808 Series humidity temperature transmitter is right for you?
> HG808-T
Note: The high temperature humidity sensor transmitter will cost about 1 minute to update its working status to ensure stable value measurement.
When Should Select High Temp? Temperature and Humidity Sensor
Common type temperature and humidity sensors usually have a max temperature of 80 Deg.C.(this is our product standard), and when the temperature is over 80℃. for long-term,e.g. 90℃ or over 100℃ or higher temperature. Under such conditions, it is better to select high temp. temperature humidity transmitter.
Can't find a product that meets your needs? Contact our sales staff for OEM/ODM customization services!
